Kawai Concert Performer Series Digital Piano CP117 - Manual (Page 51)

Recording a Song P. 45
2) Press the REC button.
3) Press the appropriate F button(s) below the LCD screen to set the desired Part(s) to REC.
4) Begin recording by following step 2 in the “To Record” section on page 42.
Remember Re-Recording a Part completely erases the previously recorded performance for that
Part. You can Re-record or add any of the RIGHT/LEFT Parts as many times as you like but you can
only have one performance/sound for each RIGHT/LEFT Part.
Saving the song
Once you finish recording a song you should save it to disk before you turn the power OFF. Once
the power is turned OFF your song data will be lost.
See the section titled “Saving Data to a Floppy Disk” on page 129.
• If you press the EXIT button to get out of the Easy Recorder, the CP will automatically prompt
you to save your work.
Erasing the song
Whenever a Part is selected for recording, the new performance is written right over any existing
one that may be there for that Part. In this sense, the Easy Recorder is just like a tape machine. A
new song will simply erase the old song during the recording process.
However, if you wish to simply erase all the Parts and the Style in a song at once you can use the
Delete function.
To delete a song:
1) Press the DELETE button (F2) while the Recorder is not recording or currently ready to record. The
CP will ask if you are sure.
2) Use either the YES (F7) button to proceed or NO (F1) to cancel.