Kawai Stage Piano MP5 - Manual (Page 42)

42
6.3.7 Modulation Wheel Control Change Number
This parameter assigns a Control Change Number to the Modulation Wheel on
the right side of the front panel.
See page72 for the list of Control Change numbers.
Note:
When the following Numbers are selected for the FootSW,EXP or Modulation
Wheel Control Change Number, the functions affect the internal sounds, too.
1. Modulation Wheel (MOD)
7. Volume (VOL)
10. Pan (PAN)
11. Expression Controller (EXP)
64. Damper Pedal (HLD)
66. Sostenuto (SST)
67. Soft Pedal (SFT)
6.3.8 Left Pedal Mode
This parameter determines whether the left pedal of the optional F-20 (twin
pedal) accessory functions as Soft or Sost (Sostenuto).
Soft: The Left Pedal works as a Soft Pedal ( Default ).
When the Rotary EFX is in use, the Soft Pedal changes function to a Fast/Slow
Rotor switch.
Sost: The Left Pedal works as a Sostenuto Pedal.
When the Damper setting ( see page38 ) is Off or Norm, the sosotenuto pedal
works with natural decay. When the Damper setting is Hold, the sostenuto
pedal works with a steady susutain level.
6.3.9 Master Volume
Adjust the total volume of the SETUP.
The value changes from 0 to 127.