Kawai Stage Piano MP5 User Manual
Page 16
16
In Sound mode, the “1” in the display indicates that the zone 1 is currently
selected.
When the multitimbre is off, the default settings of the zones are as follows.
It is recomended for simple MIDI transmit/receive use on stage etc.
The default TXchannel is System Ch (see page45).
Zone 1 Internal On
(Plays internal sound)
Zone 2 Internal Off
(Muted)
Zone 3 External On
(Plays external device)
Zone 4 External Off
(Muted)
When the multitimbre is on, the default settings of the zones are as follows.
It is recomended for recording/playback with PC or sequencer.
The default TXchannel is System Ch (see page45).
The system channel mode is Panel:
Zone 1 Both
On
(Plays internal sound & external device)
Zone 2 int
Off
(Muted)
Zone 3 int
Off
(Muted)
Zone 4 int
Off
(Muted)
The system channel mode is Normal:
Zone 1 Both
On
(Plays internal sound & external device)
Zone 2 Both
Off
(Muted)
Zone 3 Both
Off
(Muted)
Zone 4 Both
Off
(Muted)
The zone mode for each zone is indicated by the INT/EXT LED beside the
faders. The zone status for each zone is indicated by the ZONE ON/OFF
buttons. If the ZONE buttons is red, this zone is assigned to the entire
keyrange of the MP5. If the button is green, the key range for that zone is
less than the entire key range. You can check the key range setting by
holding the SELECT button for the zone for 1 second.