Kawai Stage Piano MP5 - Manual (Page 27)

27
5. Control Knobs
Select the function with the buttons on the left and use the knobs to change
the values. You can also move the cursor with the MENU buttons and change
the value with the VALUE buttons while the display is showing Control Knobs
function.
5.1 EFFECT
Make sure that the EFFECT button in the CONTROL KNOBS section is lit. If the
EFFECT button is turned off, press it to turn it ON.
The CONTROL KNOBS are now active and assigned to the EFX/REVERB
parameters for the selected zone. Use the CONTROL KNOBS to change the
current settings.
EfR (EFX Rate) adjusts the value of the preset parameter for each EFX. (internal
only)
EfD (EFX Depth) adjusts the depth of the EFX added to the sound.
RvT (REVERB Time) adjusts the reverb time. (internal only)
RvD (REVERB Depth) adjusts the depth of the reverb added to the sound.
EFX parameter list
EFX Rate EFX Depth
1. CHORUS rate 0 -12.7Hz send level
2. FLANGER rate 0 -12.7Hz send level
3. CELESTE rate 0 -12.7Hz send level
4. ENSEMBLE rate 0 -12.7Hz send level
5. DELAY 1 delay time 0 -100 (%) send level
6. DELAY 2 delay time 0 -100 (%) send level
7. DELAY 3 delay time 0 -100 (%) send level
8. DELAY 4 delay time 0 -100 (%) send level
9. AUTO PAN 1 rate 0 -12.7Hz wet balance
10. AUTO PAN 2 rate 0 -12.7Hz wet balance
11. AUTO PAN 3 rate 0 -12.7Hz wet balance
12. TREMOLO 1 rate 0 -12.7Hz wet balance
13. TREMOLO 2 rate 0 -12.7Hz wet balance
14. TREMOLO 3 rate 0 -12.7Hz wet balance
15. PHASER 1 rate 0 -12.7Hz wet balance
16. PHASER 2 rate 0 -12.7Hz wet balance