beautypg.com

Rds radio alarm e-bench kh 2295 – Kompernass KH 2295 User Manual

Page 7

background image

RDS Radio Alarm

E-Bench KH 2295

1. Intended use

The RDS Radio Alarm is intended exclusively …

Ú

for the reception of VHF/FM radio stations

Ú

as an alarm

Ú

for stationary operation in covered areas

Ú

for private, non-commercial applications.

2. Technical data

Power supply:

230 V ~ / 50 Hz, 5 W

Reception range UKW/FM:

87,5 – 108,5 MHz

3. Safety Instructions

Read the operating instructions carefully before

using the appliance for the first time and pre-

serve this booklet for later reference. Pass this

booklet on to whoever might acquire the appli-

ance at a future date.

Danger!

Should moisture/water permeate into the RDS

Radio Alarm, …

Ú

there is the risk of receiving an electric

shock!

Ú

it could be irreparably damaged!

Thus:

DO NOT use or store the RDS Radio Alarm …

Ú

in moist environments!

Ú

in close proximity to water! Additionally,

NEVER subject the RDS Radio Alarm to

spray or rain water.

Ú

Never place water-filled receptacles on the

RDS Radio Alarm!

Exposure to strong heat sources can lead to an

overheating of the RDS Radio Alarm and to the

melting of plastic parts. This could irreparably

damage the RDS Radio Alarm, and there is the

additional risk of a fire! Thus:

Ú

Do not place the RDS Radio Alarm in close

adjacency to sources of heat.

Ú

Do not place any open fire sources – e.g.

burning candles – on the RDS Radio Alarm!

Ú

Do not cover the ventilation openings of the

RDS-Radio Alarm! Consequently, do not

place the RDS Radio Alarm on blankets or

other textiles. Ensure that the ventilation

openings are a minimum distance of 10 cm

away from walls or large objects.

Ú

Do not use or store the RDS Radio Alarm in

dusty environments. Otherwise dust could

penetrate into the RDS Radio Alarm. If

large quantities of dust enter into the RDS

Radio Alarm it could overheat and be irrep-

arably damaged. There is also the risk of a

fire!

In the case of a defect, never attempt to repair

the power cable yourself! There is the risk of

receiving an electric shock! Instead, consult our

service partner responsible for your country.

Contact information for our service partners is

  | 

 