Kompernass KH 2295 - Manual (Page 13)

Ú Button “3/8”
j
– for selection of 3 resp.
8 as the second digit of the programme
position
Ú Button “4/9”
h
– for selection of 4 resp.
9 as the second digit of the programme
position
When the desired programme position
number for the tuned radio station is shown
in the display
d
:
5
Press the button “Memory”
g
again once.
In the display
d
the programme position
number is shown in addition to the station
frequency details, “MEM” no longer blinks.
With RDS radio stations the station name
and additionally the RDS logo is shown in-
stead of the frequency and the programme
position. To show the frequency and pro-
gramme position of RDS radio stations
during their reception: Press once on the
button “Memory”
g
. The frequency and
programme position of the tuned station is
then shown in the display
d
for ca. 5 sec-
onds.
The radio station is now saved to the shown
programme position.
8.1.3 Selecting saved radio stations
Select a radio station from the stations automa-
tically saved to the fixed programme positions.
There are 50 fixed programme positions, begin-
ning with programme position 10 and ending
with programme position 59.
If you wish to receive the time signal, to auto-
matically adjust the time and date: Select an
RDS radio station, which is recognisable from
the RDS logo shown in the display
d
.
To select the programme position of a radio
station:
1
First of all select the first digit of the pro-
gramme position number of the desired
radio station. For this, repeatedly press the
button “Group WEC”
f
. As soon as the
desired figure for the first digit of the pro-
gramme position is shown in in the dis-
play
d
:
2
Select the figure for the second digit of the
two-figure programme position number.
Repeatedly press the buttons “0/5” to “4/9”.
The buttons have the following functions:
Ú Button “0/5”
;
– for selection of 0 resp.
5 as the second digit of the programme
position
Ú Button “1/6”
l
– for selection of 1 resp.
6 as the second digit of the programme
position
Ú Button “2/7”
k
– for selection of 2 resp.
7 as the second digit of the programme
position
Ú Button “3/8”
j
– for selection of 3 resp.
8 as the second digit of the programme
position
Ú Button “4/9”
h
– for selection of 4 resp.
9 as the second digit of the programme
position
The radio station saved to the selected pro-
gramme position is now played back. In the
display
d
is shown the programme position
number of the radio station in addition to
the frequency details. With the relocation of
an RDS radio station, after a few seconds the
station name is shown instead of frequency
and programme position number. To show
the frequency and programme position of
RDS radio stations during their reception:
Press once on the button “Memory”
g
. The
frequency and programme position of the
tuned station is then shown in the display
d
for ca. five seconds.
13 |
 