Kompernass KH 2295 User Manual
Page 16
8
Press the button “AL1”
2!
once. In the
display
d
the RDS radio alarm symbol
for the alarm call type Radio blinks. Press
the buttons
o
resp.
a
to switch
between the three alarm call types.
9
When you have selected the desired alarm
call type: Press the button “AL1”
2!
once.
The programming for alarm time 1 is now
saved.
The RDS Radio Alarm is now in alarm standby;
shown in the display
d
after a few seconds are:
Ú
“ALARM”
Ú
the symbol for the programmed alarm call
type
Ú
the programmed alarm time
Ú
the abbreviation for the next weekday on
which the alarm function will be switched
on.
If you would like to programme a second alarm
time (AL2): Follow the steps 1 to 9 in this chap-
ter. However, at the steps 1, 2, 8 and 9 press the
button “AL2”
2)
instead of the button “AL1”
2!
.
8.2.2 Switching the alarm standby on/off
To switch the alarm standby off: With the radio
switched off, press and hold the button …
Ú
“AL1”
2!
to switch off alarm time 1
Ú
“AL2”
2)
to switch off alarm time 2.
In the display the indicators extinguish for …
Ú
“ALARM”
Ú
the symbol for the programmed alarm call
type
Ú
the programmed alarm time
Ú
the abbreviation for the next weekday on
which the alarm function will be switched
on.
To switch the alarm standby back on: Once
again press the buttons “AL1”
2!
resp. “AL2”
2)
.
8.2.3 Ending the alarm process
To end the alarm process when the alarm signal
sounds: Press the button “POWER On/Off”
s
.
8.2.4 Using the snooze function (alarm inter-
ruption)
You can interrupt the alarm signal by pressing
once on the button “SNOOZE”
e
. The ope-
rational state display
w
now blinks. After ca. 9
minutes the alarm call sounds again. If you wish
to interrupt the alarm signal once more, press
the button “SNOOZE”
e
again. The alarm sig-
nal can be interrupted any number of times.
ô
Note:
The alarm call interruption functions with all
three alarm call types. With the alarm call type
“Radio and alarm tone”, pressing the button
“SNOOZE”
e
interrupts the alarm tone. After
ca. 9 seconds it sounds again. If the alarm tone
is not interrupted, it sound for ca. 10 minutes.
Subsequently the radio switches itself on as the
alarm signal. If the button “SNOOZE”
e
is now
pressed, the radio is switched off. However, after
ca. 9 minutes the alarm tone sounds again.
8.2.5 Switching off the alarm function for the
weekend
To switch off the alarm function for weekends:
1
With the radio switched off, press the but-
ton “Group WEC” once.
f
. In the display
d
“WEC” is shown. The alarm functions are
now switched off for weekends.
|
1