Kompernass KH 2295 - Manual (Page 17)

2
To switch the alarm functions for week-
ends back on again: Press the button “Group
WEC”
f
once more. In the display
d
the
indicator “WEC” extinguishes.
8.3 Using the timer functions of the
RDS Radio Alarm
8.3.1 Programming the sleep timer
With the sleep timer switched on, the radio
automatically switches itself off after a pro-
grammed period of time. This facility can be
used if you like to listen to music to help you
fall asleep.
To programme the sleep timer:
1
Press the button “Sleep”
y
once. If you
press the button “Sleep”
y
with the radio
switched off, it switches itself on. Blinking
in the display
d
are the bed indicator, “60”
and the clock symbol.
2
Programme in the desired period until
switch off of the radio. Timespans between
0 and 120 minutes are available. To do this,
press the buttons
o
resp.
a
. With
each press of the buttons you increase or de-
crease the indicated timespan by ten min-
utes. If you select “00” as the timespan, the
radio switches itself off after a few seconds
without pressing a button.
3
Press the button “Sleep”
y
once more to
confirm the programming. The radio now
switches itself off automatically on expiry
of the programmed timespan. The time re-
maining before automatic switch off is
shown in the display
d
.
4
To switch off the sleep timer: Hold the but-
ton “Sleep”
y
pressed down until the radio
switches off. The bed symbol and the time-
span indicator extinguish.
8.3.2 Programming the appointment timer
(“Special Day Alert”)
With the appointment timer you can remind
yourself of important dates/times. The RDS Ra-
dio Alarm offers five memory slots (“SDA1” to
“SDA0”) for appointments. To programme the
appointment timer:
ô Note:
To carry out the steps 1 to 8 you have ca. ten sec-
onds for each step. If one step is delayed, you
must start again from step 1.
1
With the radio switched off, press the button
“Memory”
g
four times. In the display
d
there now blinks in rotation the date indica-
tor “31-12-06” and “SDA1”.
2
Press the button
i
once. In the display
d
the date indicator “31” now blinks.
3
By pressing the buttons
o
resp.
a
,
programme the desired day. The weekday
details are thereby automatically modified to
the programmed day.
4
Press the button
i
once more. In the
display
d
the month indicator “12” now
blinks.
5
By pressing the buttons
o
resp.
a
programme the desired month. The week-
day details are thereby automatically modi-
fied to the programmed month.
6
Press the button
i
once more. In the
display
d
the year indicator “06” now
blinks.
7
By pressing the buttons
o
resp.
a
programme the desired year.
8
Press the button “Memory”
g
once to con-
firm the programming.
1 |
 