Shure WH20 - Manual (Page 6)

7
WASHING THE ELASTIC HEADBAND
The elastic headband can be removed from the wireframe and hand-washed in a mild soapy wa-
ter solution. To remove and wash the headband, follow these steps:
1.
Remove the microphone cable retainer from the wireframe.
2. Slide the elastic headband off the wireframe.
3. Wash the headband and allow to dry thoroughly.
4. Slide the headband around the wireframe to its original position. Reattach the cable with the plastic
retainer.
Note that the elastic headband supplied with the WH20 is not a standard size; head-
bands purchased in stores are too long for this application.
SPECIFICATIONS
Type
Dynamic, Close-Talking
Frequency Response (at 8 mm)
50 to 15,000 Hz
TYPICAL FREQUENCY RESPONSE
FIGURE 6
500 1,000 2,000 5,000 10,000 20,000 50 100 200 20
0
–10
+10
Hz
dB