Shure SCL5 User Manual

Scl5

SCL5

Sound Isolating Earphones

The SCL5 combines Dual Live

Performance Drivers with an Inline

Crossover to create the same reference-

quality audio developed for

professional musicians.

The result of dedicated

speakers for highs

and lows is the faithful

reproduction of precision

highs, natural mids, and

full-bodied bass.

INSERTING THE EARPHONES

If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

WEARING THE EARPHONES

Two popular methods for wearing the earphones are illustrated below.

CHOOSING AN EARPHONE SLEEVE

Your earphones come with a selection of sleeves. Make sure the sleeve you
use is easy to insert into your ear, fits comfortably, and is easy to remove from
your ear.

CLEANING THE EARPHONE NOZZLE

If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.

SHURE Incorporated http://www.shure.com

United States, Canada, Latin America, Caribbean:

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446

Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414

Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Make sure that the sleeve completely
covers the earphone nozzle. If any part
of the nozzle is exposed, the sleeve is
not properly installed.

Yellow and Black Foam Sleeves
When using the foam sleeves, compress the sleeve between
your fingers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal. Black foams come in
small, medium and large sizes.

Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.

Triple-Flange Sleeves
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.

Nozzle

Wax Removal Loop

Tighten the cable and take up slack by raising the cable sleeve .

When cleaning, do not force any object through the earphone nozzle! This will
damage the earphone sound filter.

If necessary, the supplied replacement nozzles may be used. See the back of
this guide for instructions on nozzle replacement.

Printed in U.S.A.

Over the ear
in back

Over the ear
in front

left ear

right ear

Warning: The wax removal loop is only to be used to clean
earphones. Any other use, such as using the tool to clean
ears, could result in injury.