Shure E4c User Manual

Shure Headphones

E4c

Sound Isolating Earphones

The E4c earphone features High-

Definition drivers with Tuned-Port

technology for an ultra-wide frequency

soundstage with brilliant

highs and extended bass.

As the ideal companion

to any portable or home

audio source, the E4c

incorporates the same

precision components

used by professional

musicians to bring

incredibly accurate sound

with remarkable isolation.

�

INSERTING THE EARPHONES

If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

WEARING THE EARPHONES

Three popular methods for wearing the earphones are illustrated below.

CHOOSING AN EARPHONE SLEEVE

Your earphones come with a selection of sleeves. Make sure the sleeve you
use is easy to insert into your ear, fits comfortably, and is easy to remove from
your ear.

CLEANING THE EARPHONE NOZZLE

If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.

FULL TWO YEAR WARRANTY

Shure Incorporated (“Shure”) hereby warrants that this product will be free
from defects in materials and workmanship for a period of two years from
the date of purchase. At its option Shure will repair or replace the defective
product and promptly return it to you, or refund the purchase price. You should
retain proof of purchase to validate the purchase date and return it with any
warranty claim.

If you believe this product is defective within the warranty period, carefully
repack the unit, insure it, and return it postage prepaid to:

Shure Incorporated
5800 W. Touhy Ave.
Niles, IL 60714-4608

SHURE Incorporated http://www.shure.com

United States, Canada, Latin America, Caribbean:

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446

Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414

Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Make sure that the sleeve completely
covers the earphone nozzle. If any part
of the nozzle is exposed, the sleeve is
not properly installed.

Foam Sleeves
When using the foam sleeves, compress the sleeve between
your fingers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal.

Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.

Triple-Flange Sleeves
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.

Nozzle

Wax Removal Loop

Tighten the cable and take up slack by raising the cable sleeve  .

When cleaning, do not force any object through the earphone nozzle! This will
damage the earphone sound filter.

If necessary, the supplied replacement nozzles may be used. See the back of
this guide for instructions on nozzle replacement.

Printed in U.S.A.

Flex Sleeves
In small, medium, and large sizes. Made from translucent
PVC.

Over the ear
in back

Over the ear
in front

Straight down

left ear

right ear