Sony 4-153-621-13(1) - Manual (Page 150)

PRS-600.GB.4-153-621-11(1)
150
Troubleshooting
Troubleshooting
If the Reader does not function as expected, try the
following steps to resolve the issue.

Reset the Reader by pressing the RESET button
with the tip of the supplied stylus, or a small pin or
clip, then slide the POWER switch to turn on the
Reader.
Removing the tip from the supplied stylus
Twist the tip until it detached from the supplied stylus. To
push the RESET button, use the other end of the tip that
is stored in the body. Be sure to attach again after using
it.
Use to push the RESET button
The content and settings stored on the Reader are not
affected by resetting, and no information is erased.
Continued
Troubleshooting