StorageTek StorageNet SCSI-3 - Manual (Page 25)

FCP and SES Commands
8946121402 3-5
Switch Diagnostics Pages
Before each SCSI command is discussed in detail, the diagnostics pages are defined in
Table 3-7 . They are particularly relevant to two commands: Receive Diagnostic
Results and Send Diagnostics . The switch SESD supports 7 diagnostics pages.
Table 3-8 shows the page codes 80h through 85h which are vendor specific pages and are
roughly mapped from the switch Management Information Base (MIB) Definition for v1.6a
firmware.
Supported Diagnostics Pages
If requested using the Send Diagnostic or Receive Diagnostic Result command, the
SESD returns the response shown in Table 3-9
Table 3-7 Diagnostics Pages
Page Code Description
00h Supported Diagnostics Pages
80h Switch Page
81h Sensor Table Page
82h Fabric Page
83h Neighborhood Table Page
84h Fibre Channel Port Table Page
85h Name Server Local Table Page
Table 3-8 Switch MIB Groups
Page Code Switch MIB Group
80h System Group, variables 1..8, 20, 21
81h System Group, Sensor Table
82h Fabric Group, variables 1, 2 and 8
83h Fabric Group, Neighborhood Table
84h Fibre Channel Port Table
85h Name Server Local Table
Table 3-9 Page Code 0 Format – Supported Diagnostic Pages
Byte/Bit 7 6 5 4 3 2 1 0
0 Page Code = 00h
1 Reserved