StorageTek StorageNet SCSI-3 User Manual
Page 15
SES Management
8946121402
1-3
Therefore, if there are 5 switches in the Fabric SES reports 6 LUNs, one LUN value for each
switch and LUN0 for the local client connection.
Other SCSI-3 enclosures can also run SES outside the Fabric, such as JBODs, RAID-5 arrays,
SCSI-3 hard drives, and SCSI-3 tape drives. These devices are identified by their Fabric and
SCSI addresses, and are assigned LUNs using standard SCSI-3 host adapter LUN addressing.
Note:
It is not this guide’s intent to describe the environment outside of the Fabric.