Shure E5C - Manual (Page 7)

ENGLISH
5
INSERTING THE EARPHONES
1. Insert the earphones using the following guidelines:
•
Note the difference between the right and left earphones:
earphone with blue dot = left ear
earphone with red dot = right ear
•
When inserting the earphones, pull the ear upward and outward to
straighten out the ear canal.
2. Wrap the form-fitted wire over the top and down the back of the ear.
3. Use the adjustment tube to secure the cables comfortably.
•
Flex sleeves -Try the different sizes to
determine the best fit for comfort and
isolation.
•
Foam sleeves -Compress the foam sleeve
at the end of the earphone by rolling it be-
tween your thumb and forefinger before in-
serting it. Hold the earphone in place for
about 10 seconds while the foam expands
and creates a tight seal.
•
The quality of the frequency
response and sound isolation
depend on how well the sleeves seal.
If the earphone seems to be lacking in low
frequency response, insert the earphone deeper into the ear canal to obtain
a better seal, or try one of the other sleeve options.