Insignia NS-LCD32FS - Manual (Page 11)

11
Insignia NS-LCD32FS 32” LCD TV
www.insignia-products.com
Connecting a camcorder
To connect and play video from a camcorder:
1 Plug the audio/video cable into the AUDIO L,
AUDIO R, and VIDEO jacks on the back of
your TV.
2 Plug the other end of the audio/video cable
into the audio and video out jacks on the
camcorder.
3 Turn on your TV.
4 Press the INPUT button repeatedly to select
Composite 2.
5 Turn on the camcorder, then set it to output
mode. See your camcorder documentation
for more information.
6 Insert a tape into the camcorder, then press
the Play button on the camcorder.
Connecting a DVD player
To connect a DVD player and play a DVD:
1 Plug the HDMI cable into the HDMI jack on
the back of your TV and to the HDMI Output
jack on the back of the DVD player.
2 Turn on your TV.
3 Press the INPUT button repeatedly to select
HDMI.
4 Turn on the DVD player.
5 Insert a DVD, then press the Play button on
the DVD player.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
TV Y=yellow (video)
W=white (audio left)
R=red (audio right)
Video cable Audio cable
OUT IN
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
If the DVD player has DVI output only, use a
DVI-to-HDMI adapter cable (not supplied) to
connect the DVD player to the HDMI jack on the
back of your TV. Then connect the audio cable to
the D-SUB AUDIO IN jack on the back of your TV.
TV
HDMI
Output