Replacing wheel handrim, Replacing/repairing wheel tire/tube, Refer to – Invacare Compass SPT PH904A User Manual
Page 60
SECTION 8—WHEELS
60
Replacing Wheel Handrim
NOTE: For this procedure, refer to FIGURE 8.5.
1. Remove the wheel from the wheelchair. Refer to Installing/Removing Rear Wheels on
2. Remove the button screws that secure the existing handrim to the wheel.
3. Remove the existing handrim.
4. Install the new handrim by reversing STEPS 2-3.
ƽ WARNING
Make sure detent pin and locking pins of the quick-release axles are fully released
BEFORE operating the wheelchair.
5. Reinstall wheel to the wheelchair. Refer to Installing/Removing Rear Wheels on
6. Repeat STEPS 1-5 for the opposite wheel if necessary.
FIGURE 8.5 Replacing Wheel Handrim
Replacing/Repairing Wheel Tire/Tube
ƽ WARNING
Replacement of wheel tire or tube MUST be performed by a qualified technician.
Handrim
Button Screw