Replacing dual point arm pad, Replacing dual point arm clothing guards – Invacare Compass SPT PH904A User Manual

Page 41

SECTION 5—ARMS

3. Lock the armrest assembly by pressing the release lever into the down (vertical)

position as shown in Detail “A”.

4. Pull up on the armrest assembly to ensure the armrest is locked in place.

5. Repeat STEPS 1-4 for opposite side of wheelchair, if necessary.

FIGURE 5.1 Using/Adjusting Dual Point Arms

Replacing Dual Point Arm Pad

NOTE: For this procedure, refer to FIGURE 5.2 on page 41.

1. Remove the mounting screws that

secure the arm pad to the armrest
assembly.

2. Replace arm pad and securely tighten

with the existing mounting screws.

Replacing Dual Point Arm
Clothing Guards

NOTE: For this procedure, refer to
FIGURE 5.2 on page 41.

NOTE: This procedure is for fixed height dual
point arms ONLY.

1. Remove the four screws that secure the

existing clothing guard to the armrest
assembly.

FIGURE 5.2 Replacing Dual Point Arm

Dual Point Arm

Height

Adjustment

Lever

Rear Arm

Socket

Front Socket

Arm

Arm Release

Lever

Locked - Down

(Vertical)

Unlocked - Up

(Horizontal)

DETAIL “A”

Mounting

Screws

Armrest

Assembly

Screws

Clothing

Guard

Arm Pad

This manual is related to the following products: