Invacare Compass SPT PH904A - Manual (Page 46)

SECTION 5—ARMS
Compass™SPT™ 46 Part No 1122134
Adjusting T-Arm Transfer Assists And/or Side Guards
NOTE: For this procedure, refer to FIGURE 5.8.
1. Remove the T-Arm from the wheelchair. Refer to Installing/Removing T-Arms on
page 42.
2. Remove the two socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one of the following:
• Small Side Guards - Move the bottom clamp UP to one of two mounting positions
in the side guard.
• Large Side Guards - Move the bottom clamp UP to one of three mounting positions
in the side guard.
4. Secure the side guard to the bottom clamp with the two socket screws.
5. Install the T-Arm onto the wheelchair. Refer to Installing/Removing T-Arms on
page 42.
FIGURE 5.8 Adjusting T-Arm Transfer Assists And/or Side Guards
Socket
Screws
Bottom Clamp
Transfer
Assist
Side Guard
T-Arm