IBM 3590 - Manual (Page 121)

Appendix B. FID Messages
Table 34 describes FID messages and customer action for the FID. A FID can
be displayed on the drive panel or obtained from host software or error logs.
See “Intervention Messages” on page 16 for an example of a FID on the drive
panel.
Table 34. FID Messages
FID Description Customer Action
00-09
Configuration or
Setup Problem
Call for service
90-98 Drive Problem Call for service
9A
ACF or Cartridge
Problem
1. Ensure you are using correct cartridge, 3590 only.
2. This failure may be caused by a dirty cartridge.
Look for any contamination on the sides of the
cartridge that could cause the pinch rollers to slip.
Clean or replace the cartridge.
Note:
Do not ship magazines with cartridges
loaded. The cartridges will vibrate in the magazine
slots resulting in contamination on the sides of the
cartridges that may cause this failure.
3. This failure may be caused by a magazine. Try
another magazine.
4. Call for service if problem remains.
9B
ACF or Cartridge
Problem
1. Check the position of all cartridges to ensure they
are properly positioned in the magazine and in the
priority cell. A cartridge that extends too far into the
magazine in the import position or a damaged
cartridge can cause this error.
2. Remove the magazine and look for any obvious
obstructions.
3. Try another magazine in the ACF.
4. Call for service if problem remains.
9C-9E Drive Problem Call for service
© Copyright IBM Corp. 1995, 2001 101