Intelligent Motion Systems MDrive34 - Manual (Page 6)

ORDER INFORMATION
Control Knob
The MDrive34 is available with a fac
to ry-mount ed
rear control knob for man u al shaft positioning.
Planetary Gearbox
Effi cient, low maintenance Planetary Gearbox are of-
fered assembled with the MDrive34. Details inside.
Encoder
The MDrive34 Motion Control is available with an in-
ternal 512-line magnetic encoder with index mark.
Linear Actuator
The MDrive34 Motion Control with long life ACME
Screw Linear Actuator is avail able with the following
trav el/full step:
Screw A ............. 0.005”/full step
Screw B ............. 0.0025”/full step
MDRIVE34 MOTION CONTROL – OPTIONS
Screw C ............. 0.00125”/full step
Screw D ............. 0.000625”/full step
Screw E ............. 0.0005"/full step
Standard screw length is 6.0” (152.4mm) plus the
mounting end thread. Cus tom lengths up to 24.0”
are available without mounting end thread. Linear
Actuators are Non-Captive style. Contact the factory
regarding Captive Shaft or External styles.
Communications Converter Cable
This convenient 6' (1.8m) accessory cable connects a
PC's standard DB-9 Serial Comm Port to the MDrive's
P2 Connector. An in-line RS-232 to RS-485 con vert er
enables parameter setting to a single MDrive Motion
Control. Purchase of this cable is recommended with
fi rst orders. Part No. MD-CC200-000.
© 2002, 2004 Intelligent Motion Systems, Inc. All Rights Reserved. REV121704
P.O. Box 457, 370 N. Main Street
Marlborough, CT 06447 U.S.A.
Phone: 860/295-6102
Fax: 860/295-6107
E-mail: [email protected]
Home Page: www.imshome.com
TECHNICAL SUPPORT
Eastern U.S.
Phone: 860/295-6102
Fax: 860/295-6107
E-mail: [email protected]
Western U.S.
Phone: 760/966-3162
Fax: 760/966-3165
E-mail: [email protected]
IMS MOTORS DIVISION
105 Copperwood Way, Suite H
Oceanside, CA 92054
Phone: 760/966-3162
Fax: 760/966-3165
E-mail: [email protected]
IMS EUROPE GmbH
Hahnstrasse 10, VS-Schwenningen
Germany D-78054
Phone: +49/7720/94138-0
Fax: +49/7720/94138-2
E-mail: [email protected]
European Sales Management
4 Quai Des Etroits
69005 Lyon, France
Phone: +33/4 7256 5113
Fax: +33/4 7838 1537
E-mail: [email protected]
German Sales/Technical Support
Phone: +49/35205/4587-8
Fax: +49/35205/4587-9
E-mail: [email protected]
Product information covered by IMS Product Disclaimer available at www.imshome.com.
Visit the IMS web site for the most up-to-date product information.
Distributed By:
24 = Single Stack
†
B = 0.0025”
A = 0.005”
C = 0.00125”
MDIF 34
Stack Sizes
29 = Linear Actuator
31 = Double Stack
47 = Triple Stack
†
N
L
E
Screw Type (Travel/Full Step)
Internal
Encoder
Control
Knob
Linear
Actuator†
Stack Size 29 is only available as a Linear Actuator and is the ONLY size Linear Actuator offered. (MDIF3429LX)
MDRIVE34 MOTION CONTROL OPTIONS
Example #1: Part Number MDIF3431 is an MDrive34
Motion Control (
I) with Flying Leads, NEMA 34 motor, stack size 31.
Example #4: MDIF3431E
Adds a 512-line internal magnetic Encoder
to the part shown in example #1.
Example #2: MDIF3431N
Adds a Control Knob
to the part shown in example #1.
Example #5: MDIF3429LA10.5
MDrive34 Motion Control Linear Actuator
with a 0.005”/Full Step Acme
Screw custom cut to 10.5”.
MAY NOT be combined with other options.
Note: MDrive34 Linear Actuator
Available ONLY in Stack Size 29
Custom Screw Length
Range 2.0” to 24.0”
Format XX.X
eg. 08.5 for an 8.5” Screw
(6.0” Screw Length Standard)
OPTION
Planetary
Gearbox
Example #3: MDIF3431G5
Rounding ratio to the nearest whole number,
the above adds a Planetary Gearbox with
5.18:1 ratio to the part shown in example #1.
Add -F if optional NEMA Flange is desired.
D = 0.000625”
E = 0.0005”
G
Gearbox Ratio
Rounded to Nearest Whole Number