Invacare MicroAir MA60 User Manual
Page 23
6 OPERATION
23
3.
Read the LCD Display. The LCD Display will show:
•
0 if the current setting is 0 (2 mmHg).
•
5 if the current setting is 50% of the selected pressure.
4.
Press the Soft (
) or Firm (
) buttons to toggle between the two settings.
5.
Press the Power button to save the setting.
Static Button
1.
Press the Static button (
) to enter Static mode and maintain all air cushions in the mattress at a constant pressure.
Firm/Soft Buttons
1.
Select comfort pressure settings by pressing Firm (
) or Soft (
) button.
•
Soft Button - Pressing this button reduces the pressure setting in the mattress.
•
Firm Button - Pressing this button increase the pressure setting in the mattress.
The On and Standby LEDs will be lit.
The control unit will exit this adjustment mode if no button is pressed for 30 seconds.
The Static LED is illuminated GREEN.
The patient comfort pressure ranges from Soft (level 0 = 6±4 mmHg) to Firm (level 9 = 32±6 mmHg). The Comfort
Control LED displays the patient comfort pressure levels from 0 to 9 and provides a guide to the caregiver to set
approximate comfort pressure level depending on the patient weight. If the patient’s weight to height ratio is above average,
increase the pressure setting by approximately 20%.