InFocus MaxFlight MT3000(B) User Manual
Page 80
Player
Emergency, Maxflight I/O , digital, DI0
5-21B
CREATING AND CONFIGURING THE ARTAFICIAL
INTELLIGENCE (AI) JOYSTICK(Required on old program
software)
On the Maxzilla Truck Simulator, the computer generated (AI) players device must be initiated
and configured for artificial players to work. This is accomplished using the following procedure:
Start the regular program—when the program window is on the desktop.
Click
on
“Configuration Icon” – this brings you to the property window
Select, if it is there, or create the “Maxzilla Ride Joystick”
TO Create – click on “Create” select Maxzilla Ride Joystick, select or leave at
Auto Detect
Click “OK”
Double
Click
on
“Maxzilla Ride Joystick” this opens the “Properties” window
Click on –Input Devices tab—ensure “Maxzilla AI Device” is there, if not, create it by
clicking on “Create” select “Maxzilla AI Device” –click “Device” tab and ensure device
is started and enabled.
5-21C Enabling and Calibrating Joysticks/Throttles running USB
control Boards.
a. START on task bar, select Control Panel, select Gaming Options
b. USB adapter must be visible
c. Click on the adapter and select Properties
d. Click
settings tab
e. Click
Calibrate and follow Wizard instructions
f. Select Test and then Apply
5-21D Steering Wheel/Throttle setup within Mondo Monster Truck
program USB Controllers.
NOTE! Before you can open the Monster Truck Program and make adjustments you must
minimize the Display Picture window. If you don’t you will not be able to get to the Config icon
on program window. This is accomplished by;
VNC to the on-board computer
Double
Click
on
VRSS icon on the desktop
Scroll to the end of the list once open, find line stating “Full Screen Display=1”
change the 1 to a 0, save the change and close the file.
Open the program control window for Mondo
D-click
on
Configuration icon
Device Manager---Double Click to open
Verify USB Interface is listed
Enable --- USB Interface—Double click on it when other page opens, go to device, ensure it is
enabled and started. If not do so. Say OK