Insignia HRSD16 - Manual (Page 86)

Configuration
86
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Setting Motion Detection Notifications
1. Highlight the desired field under the Notify heading, and press . The Motion
Detection Notify menu appears.
2. You can toggle the entire list On and Off by highlighting Notification and
pressing .
You can toggle the individual items On and Off by highlighting them and pressing
.
3. Highlight OK and press to accept your changes.
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RASplus.
Actions 2 Tab settings
In the Text-In Actions 2 tab, you can choose PTZ camera preset positions and spot
monitor actions.
Highlight the Actions 2 tab. The Motion Detection Actions 2 screen displays.
Figure 3-61 Motion Detection Actions 2 Screen