Figure 3-11, Holiday setup screen – Insignia HRSD16 User Manual
Page 41

Configuration
Document 800-00918
Rev E
41
12/07
5.
Highlight the Format field beside Time and press
. Select from the three
available time formats and press
to save the selected format.
Note
The clock does not start running until you highlight Save and
press .
6.
Highlight the field beside Time Zone and press
. Select the correct time zone
from the list and press
.
7.
Highlight Use Daylight Saving Time and press
to toggle between On and
Off.
Setting Holidays
1.
Highlight the Holiday tab, and the Holiday setup screen appears.
Figure 3-11
Holiday Setup Screen
2.
Highlight + and press
. The current date appears.
3.
Press
again to change the date. Use the LEFT and RIGHT arrows to toggle
from month to day. A white box highlights use the UP and DOWN arrows to
change the number values.
4.
Highlight the month and day, and change them by using the UP and DOWN
arrows. Press
to add the date. Dates can be deleted by highlighting the
beside the date and pressing
.
Note
Holidays that do not fall on the same date each year should be
updated after the current year's holiday has passed.