IBM 6644 - Manual (Page 59)

46 User Guide
Note: Error codes 106, 604, 605, 622 may appear only if an external USB diskette
drive is installed.
178x Hard disk or IDE device failed 1. Go to “Running the IBM Enhanced
Diagnostics program” on page 57,
and follow the instructions for
running the diagnostic program
for the hard disk drive and IDE
devices.
2. If the problem persists, have the
computer serviced.
18xx A PCI adapter has requested an
unavailable resource Go to “Starting and using the
Configuration/Setup Utility program”
on page 27 and follow the instructions
to reconfigure the PCI devices.
1962 No startup device found 1. Go to “Starting and using the
Configuration/Setup Utility
program” on page 27 and follow
the instructions to verify that the
startup sequence is configured
properly.
2. If the problem persists, have the
computer serviced.
2400 Display adapter failed; using
alternate Have the computer serviced.
2462 Video configuration error Have the computer serviced.
5962 IDE CD-ROM configuration error Have the computer serviced.
8601 Pointing device error Have the computer serviced.
8603 Pointing device has been removed 1. Make sure that the pointing device
is properly attached.
2. If the problem persists, have the
computer serviced.
Code Description Action