IBM 6644 User Manual

Page 32

Text mode
Original mode

Inserting and removing a CD disc

To insert a disc:

1. With the computer turned on, press the eject button.
2. Place the disc in the tray with the label facing up (or away from the tray), and

press the disc until it clicks into place.

3. Close the tray by gently pushing the tray closed. When the tray is closed, the

indicator light on the front of the drive will activate to indicate that the drive
is in use.

To remove a disc:

1. With the computer turned on, press the eject button.
2. Close the tray by gently pushing the tray closed.

Note:

If the tray does not slide out when you press the eject button, insert the end
of an opened paper clip into the emergency-eject hole located the front of
the CD-ROM drive.