ICP DAS USA IM-100 - Manual (Page 82)

6.7 External Trigger
Syntax:
Visu
IMC_Trigger_Enable( HANDLE Camera_Handle, int iTrigSource, int
iExpMode);
.0
s Integer,
ByVal iExpMode As Integer) As Integer
The camera needs b
Parameters:
Camera_Handle the handle gotten from the
‘pHandle’ parameter of IMC_Camera_Init().
ce The setting of External Trigger Source. The Sources of External
s:
By default, the Trigger Source of iTrigSource is
EXT_TRIGGER_INPUT0
iExpMode The setting of Trigger Exposure Mode. The Exposure Mode can
be one of bellowing Settings:
EXT_TRIGGER_MODE0 (Programmable Mode)
EXT_TRIGGER_MODE1 (Level Mode)
By default, the Trigger Exposure Mode of iExpMode is
EXT_TRIGGER_MODE1
IMC_Trigger_Enable
al C++ 6.0 / Boland C++ Builder 6.0:
short
Visual Basic 6
IMC_Trigger_Enable (ByVal Camera_Handle As Long, ByVal iTrigSource A
C#.NET 2003
Mavis.IMC_Trigger_Enable( IntPtr Camera_Handle, int iTrigSource, int iExpMode);
Description:
This function configures the External Trigger Source and enables External Trigger.
e initialized with IMC_Camera_Init().
The handle for MAVIS camera. Use
iTrig_Sour
Trigger can be one of following setting
EXT_TRIGGER_INPUT0 (0x00)
EXT_TRIGGER_INOUT1 (0x01)
EXT_TRIGGER_SOFTWARE (0x07)
- 82 -