IOGear BOSS GNS1000 - Manual (Page 65)

63
9.3 Firmware Update
In Firmware Update, the current firmware version is
shown. You can select a new firmware image to update
the unit. If you would like to upgrade your firmware, you
should download the image for the current model and
save the image on your local drive. If the image is al-
ready on your drive, please follow these steps:
1. The current firmware version is shown as 1.06.
2. In Firmware Update, click the Browse button. A
window (see Figure 9.3a) should pop-up. Please
select the image file you have downloaded. After
you confirm your selection, click the open button.
3. The image will be uploaded to the Network Server
Appliance It performs some checks on whether
the image is valid. If the image is wrong, it will not
be updated.
Note: Do NOT shutdown the unit or remove the power
source during a firmware update.
Figure 9.3a
System Management