IOGear BOSS GNS1000 - Manual (Page 32)

Wake On LAN (WOL)
The WOL function allows remote users on the
network to turn on the BOSS™. Please note that the
power adapter is connected to the BOSS™ and
plugged into a power outlet.
Hard Disk Standby
If the hard disk is idle for a while, it can enter Standby
Mode to reduce the consumption of power. In the left
menu, select NAS Management -> HD Initialization
Wizard, in HD Power Management Setting, please
select the time in Turn Off hard disk field (Figure
3.2b). If you select ‘none’, the hard disk will not enter
standby mode even it is always idled. If you select ‘5
Mins’, the hard disk will enter the standby mode once
it is idled more than five minutes. You could also refer
the setting in Section 10.1.
Figure 3.2b
30
Power Management