IOGear BOSS GNS1000 - Manual (Page 34)

In DHCP Server settings, we assign the range of
the virtual IP addresses for the four LAN ports of
BOSS™. All devices connected to the LAN ports of
BOSS™ will be dynamically assigned the IP
addresses within the range. You can either enable
the DHCP server or disable it in this screen also.
To Enable the DHCP Server
If you do not have a DHCP server on your
network,
1. Select the Enable radio button. (This is already
enabled by default).
2. Enter a number in Lease time field.
3. Enter the IP address range 1 as “192.168.2.2”
and “192.168.2.250” (default).
4. Enter the IP Address Range 2; otherwise enter
“0” in each field.
5. Enter the IP Address Range 3; otherwise enter
“0” in each field.
6. Enter the IP Address Range 4; otherwise enter
“0” in each field.
32
Network Settings
4.1 DHCP Server Settings