Integra DSR-4.8 - Manual (Page 41)

41
Using the Listening Modes
See “About the Listening Modes” in the right column for
detailed information about the listening modes. Direct
In this mode, audio from the input source is output
directly with minimal processing, providing high-fidel-
ity reproduction.
Stereo
The selected input source is processed as a stereo signal
and output by the front left and right speakers and the
subwoofer if connected.
T-D (Theater-Dimensional)
With this mode you can enjoy a virtual 5.1 surround
sound even with only two speakers. This works by con-
trolling how sounds reach the listener’s left and right
ears. Good results may not be possible if there’s too
much reverb, so we recommend that you use this mode
in an environment with little or no natural reverb.
Notes:
• T-D listening mode cannot be selected while head-
phones are connected to the DVD receiver.
• During playback a DVD-Audio or SACD, T-D listen-
ing mode cannot be selected.
Selecting Listening Modes
Press the [Listening Mode] but-
ton to select a listening mode.
Pressing this button repeatedly cycles
through all of the listening modes that
can be used with the current input
source.
Listening
Mode
About the Listening Modes