Integra DSR-4.8 - Manual (Page 22)

22
Connecting the DVD receiver—Continued
The following matrix shows how the video outputs work in relation to the various video settings.
✓: Output
*1 No picture will be output from other than HDMI when you connect the TV that the native resolution is “720p” or “1080i”.
*2 If your TV doesn’t support progressive scanning, you’ll get no picture.
*3 If your TV doesn’t support the “HD Resolution” settings of “720p” and “1080i”, you’ll get no picture.
Video input signals flow through the DVD receiver as shown.
HDMI input pass through HDMI output signals as it is.
Video Output/Video Setting Matrix
Setting
Video output
HDMI Output Setting (page 29, 30)
On (default) Off
HD Resolution (page 30) Progressive Setting (page 30)
Auto 480p (default) 720p, 1080i Progressive Interlace
HDMI
✓ ✓ ✓ *3
No output No output
Component
✓ *1 ✓ *2
No output
✓ *2 ✓
Composite
✓ *1 ✓
No output
✓ ✓
Video Signal Flow Chart
VIDEO 1 VIDEO 2/DOCK
HDMI IN V IN V IN
VIDEO OUT COMPONENT OUT HDMI OUT
DVD
Composite
HDMI Component Composite
TV, projector, etc.
Set top box, VCR, DVD recorder, etc.
Composite HDMI