Chapter 1. introduction – ICP DAS USA 8KE8 User Manual
Page 5
Chapter 1. Introduction
The i-8430,i-8830,i-8KE4 and i-8KE8 are Ethernet I/O units using DCON Protocol
Firmware E10M_nnn.exe (*1). ICPDAS provides various I/O modules(*2) ,using such as
analog input/output and digital input/output and counter modules which can be used in
remote data acquisition and control application for environment monitoring, power
management, factory automation, etc . via Ethernet communication.
(*1): For detail of E10M_nnn.exe, please refer to
CD:\Napdos\DCON\8KE4_8KE8\Firmware\Version_Annn.txt
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/dcon/8ke4_8ke8/firmware/
CD:\Napdos\DCON\8430_8830\Firmware\Version_Annn.txt
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/dcon/8430_8830/firmware/
(*2): For detail of I/O modules which can be used with 8430/8830/8KE4/8KE8,
please refer to CD:\Napdos\DCON\IO_Module\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/dcon/io_module/
8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 5