IBM AT-FS202SC/FS3 - Manual (Page 3)

iii
Electrical Safety and Emission
Compliance Statement
Standards: This product meets the following standards.
RFI Emission EN55022 Class A 1
Warning: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.
2
Immunity EN55024 3
Warning: This product requires shielded cables to comply with emission
and immunity standards. If it is used with unshielded cables, the user may
be required to take measures to correct the interference problem at their own
expense.
4
Electrical Safety EN60950, UL1950, CSA 950 5
Laser EN60825 6
Warning Class 1 Laser product. 7
Warning Do not stare into the Laser beam. 8
At time of installation, the Fiber Optic Lasers comply with FDA Radiation
Performance Standard 21CFR Subchapter J, applicable at date of
manufacture.
This is a “Class 1 LED Product” (AT-FS201, AT-FS202 models) 9
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the
FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.