Insignia X7510 User Manual
Page 111
Exchanging Messages 111
4.
Tap the Servers tab and check if your device is preset with MMS server
settings.
If there are no preset settings, tap New and enter the following
information, which you obtained from your wireless service provider:
•
Gateway. Location of the MMS server, which is usually in the form of
an IP address.
•
Port number. HTTP port number used for connecting to the MMS
server and for file transfer.
•
Server address. URL address of the server where MMS messages are
stored.
•
Connect via. Select the connection that your device uses for MMS
messages.
•
Send limit. Select the maximum MMS message size allowed by
your wireless service provider.
•
WAP version. Select either WAP 1.2 or WAP 2.0, depending on
which one is being used by your wireless service provider.
5.
Tap Done.
Notes
• If your device already has preset MMS settings, it is recommended that
you do not change these settings. If you change the preset settings, your
device may not be able to send and receive MMS messages.
• If you add several MMS message service providers to the Settings screen, you
can choose one as your default provider. Select the provider's name in the
list, then tap Set As Default.