Marantz DLPTM VP-12S3/VP-12S3L - Manual (Page 37)

ENGLISH
31
– Reset All
All settings are reset to the factory default settings except the lamp life.
When the user selects “Yes”, the following message appears:
Again, select “Yes”, and press the ENTER button.
❖
Setting the Config Menu
1. Select the desired menu item and press the
2
button.
Setting items appears on the screen.
2. Press the
3
and
4
buttons to select a setting.
3. Press the
1
button to enter the setting and return to menu item selection.
Select either 12V output or 0V output by choosing On or Off for each aspect mode. Full, Normal, Zoom, and Through.
This allows you to control such as a powered dual aspect screen with the outputs for the aspect modes.
On: Output DC 12V.
Off: No output.
❖
Setting the Trigger 2 Menu
1. Select the desired menu item and press the
2
button.
Setting items appears on the screen.
2. Press the
3
and
4
buttons to select a setting.
3. Press the
1
button to enter the setting and return to menu item selection.
INPUT ASPECT
MENU V-MUTE
ENTER
2.
1, 3
2
1, 3
Picture Adjust
Setting
Display
System
Config
Trigger 2
Preset
Full
Normal
Zoom
Through
On
On
On
On
Menu User A1
Trigger 2
INPUT ASPECT
MENU V-MUTE
ENTER 2.
1, 3
2
1, 3
Yes No
Reset All ?