Marantz DLPTM VP-12S3/VP-12S3L - Manual (Page 12)

ENGLISH
6
Remote Controller
COMP.1
PATT.
INPUT ASPECT
MENU V-MUTE
COMP.2
S-VIDEO
VIDEO
RGB
AUX
REMOTE CONTROLLER
RC-12VPS3
INPUT
ENTER
PATTERN
STANDBY POWER ON
THEATER
STD
DYNA.
USER
CINEMA
MODE
FULL
NORMAL
ZOOM
THROUGH
INFO
ASPECT
LIGHT
¡2
¡3
¡4
¡5
a
s
f
g
h
j
k
l
¡6
¡7
¡8
¡9
™0
¡0
¡1
d
™1
™2
™4
™3
™5
a STANDBY button (
☞
P.21)
Turn the projector off.
s MENU button (
☞
P.23)
Display the on-screen menu.
d 3 / 4 / 1 / 2 / ENTER buttons
Press the cursor buttons (
3
[UP],
4
[DOWN],
1
[LEFT],
2
[RIGHT]) to select menu items. Press the button at its center
to enter the selected item.
f INPUT (Input signal select) button (
☞
P.18)
Selects the input signal. Every time the button is pressed, the
selection rotates in the order of COMPONENT 1
➔
COMPONENT 2 ➔ S-VIDEO ➔ VIDEO ➔ RGB ➔ AUX.
g COMP. 1 (Component video in 1) button
(
☞
P.18)
Selects the device connected to the COMPONENT VIDEO IN
1 jack as the input source.
h COMP. 2 (Component video in 2) button
(
☞
P.18)
Selects the device connected to the COMPONENT VIDEO IN
2 jack as the input source.
j S-VIDEO button (
☞
P.18)
Select the S-VIDEO IN signal.
k VIDEO button (
☞
P.18)
Select the VIDEO IN signal.
l RGB button (
☞
P.18)
Select the RGB IN signal.
¡0 AUX button ( ☞
P.18)
Select the DVI-D IN signal.
¡1 LIGHT button
Lights up backlit buttons (POWER ON, STANDBY, MENU, V-
MUTE, INPUT, ASPECT, PATTERN) for about 7 sec.
¡2 POWER ON button (
☞
P.10)
Turn the projector on.
¡3 PATT. (Pattern) button (
☞
P.11)
Projects a focus pattern on the screen.
¡4 V-MUTE button
Turn the picture into black. Press again to resume.
¡5 ASPECT (Aspect select) button (
☞
P.18)
Selects the aspect ratio. Every time the button is pressed, the
selection rotates in the order of FULL
➔ NORMAL ➔ ZOOM
➔ THROUGH.
¡6 FULL button (
☞
P.18)
Select FULL mode from four aspect ratio modes.
¡7 NORMAL button (
☞
P.18)
Select NORMAL mode from four aspect ratio modes.
¡8 ZOOM button ( ☞
P.18)
Select ZOOM mode from four aspect ratio modes.
¡9 THROUGH button (
☞
P.18)
Select THROUGH mode from four aspect ratio modes.
™0 INFO. button (
☞
P.33)
Turn the information menu on or off.
™1 THEATER button (
☞
P.32)
Select the Theater picture mode.
Theater mode is designed for high fidelity black appearance
and is good for movie pictures.
Every time
THEATER button is pressed, the selection rotates
in the order of Theater 1 ➔ Theater 2 ➔ Theater 3 ➔ Default.
™2 STD button (
☞
P.32)
Select the STANDARD picture mode.
Standard mode is good for normal pictures.
Every time the button is pressed, the selection rotates in the
order of Standard 1
➔ Standard 2 ➔ Standard 3 ➔ Default.
™3 CINEMA button
Press to turn the CINEMA mode – auto 3-2 pull down mode –
on or off.