Marantz DLPTM VP-12S3/VP-12S3L - Manual (Page 33)

The following settings can be made:
Lamp Mode High, Low
High Bright On, Off
High Bright On : Display brightest image.
Aspect Full, Normal, Zoom, Through
VCR Mode On, Off
Cinema Auto, Off
Cinema mode : The 3-2 pull down for NTSC
and the 2-2 pull down for PAL
Iris F5.0, F3.0
Sets the lens aperture.
F5.0: Use to prioritize contrast.
F3.0: Use to prioritize brightness.
Black Setup 0IRE, 7.5IRE /
NORMAL, EXPAND (For DVI input)
Black level adjustment, for adjusting black
level by a video source.
VCR Mode
ON : A projector is forced into the intra-field only deinterlacing mode.
OFF : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion
adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown
for 625/50 sources).
❖
Setting the Setting Menu
1. Select the desired menu item and press the
2
button.
Setting items appears on the screen.
2. Press the
3
and
4
buttons to select a setting.
3. Press the
1
button to enter the setting and return to menu item selection.
INPUT ASPECT
MENU V-MUTE
ENTER
2.
1, 3
2
1, 3
Picture Adjust
Setting
System
Display
Config
Trigger 2
Preset
Lamp Mode
High Bright
Aspect
VCR Mode
Cinema
Iris
Black Setup
High
Off
Normal
Off
Auto
F5.0
0 IRE
Menu User A1
Setting
ENGLISH
27