Marantz DL5500 - Manual (Page 70)

PC ON SCREEN DISPLAY
70
4. Other signal formats may not be displayed correctly. Use AUTO ADJUST to automatically adjust the horizontal position, vertical
position, clock, and phase. We recommend you use signal, which has more than 50% of amplitude of white area at each corner of
the picture, execute Auto adjustment. It may not work correctly with dark picture. (See page 73-74).
5. Input signal level.
6. PC picture will not appear at all when receiving a signal which is not supported by this product. If PC display setting is wrong, the
monitor will display:
SYNC TTL level H/V separate signal
RGB 0.7Vpp
PC:1
NO SYNC. SIGNAL
PC:1
INVALID SCAN FREQ.
Without sync Either horizontal or vertical
frequency is inappropriate.
NOTE: 1. If PC cannot display an input signal, please try AUTO ADJUST to display the signal. This is to initialize the MultiScan
Converter.
2. If PC is set to correct horizontal and vertical frequencies and the picture is out of sync or scrambled, check the video
card documentation and set up software to properly set the monitor.
NOTE: Interlaced signal is not available.