Go-Video VR4940 - Manual (Page 22)

Initial Setup (Continued)
LOCK Settings
Movie Rating
The Lock feature allows you to prevent DVDs from
being played based on their ratings or to have certain
discs played with alternative scenes.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the Lock option.
33
While the Lock option is selected, press B to
move to the second level.
44
Use v / V to select the Movie Rating option.
55
Press B to move to the third level.
66
When you have not entered a password yet.
Enter a 4-digit password using the 0-9 buttons.
Enter the 4-digit password again to confirm.
When you have already entered a password;
Enter your 4-digit password using the 0-9 buttons.
ip
If you make a mistake before pressing ENTER, press b
to back up and then re-enter your password.
77
Select a rating from 1 to 8 using the v / V but-
tons. One (1) has the most playback restric-
tions. Eight (8) has the least playback restric-
tions.
Unlock: If you select Unlock, the Lock feature is
not active. The disc will play in full.
Level 1 to 8: Some discs contain scenes not suit-
able for children. If you set a rating for the DVD
Recorder+VCR, all scenes with the same rating or
lower will be played. Higher rated scenes will not be
played unless an alternative scene is available on
the disc. The alternative must have the same rating
or a lower one. If no suitable alternative is found,
playback will stop. You must enter the 4-digit pass-
word or change the rating level in order to play the
disc.
88
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
Password
Changing the 4-digit code
11
Follow steps 1-3 as shown under Movie Rating.
22
Use v / V to select the Password option.
33
Press B to move to the third level.
44
Follow step 6 as shown under Movie Rating.
55
While “Change” is selected, press ENTER.
If you select “Delete” then press ENTER, the pass-
word will be deleted.
66
Enter a 4-digit password using the 0-9 buttons.
77
Enter the 4-digit password again.
ip
If you a mistake before pressing ENTER, press b to
back up and then re-enter your password.
If you forget your 4-digit code
If you forget your password, follow the procedure below:
1 Press SETUP to display the Setup menu.
2 Use the 0-9 buttons to enter the 5-digit number
“21019”. The following message appears on the TV
screen: “Memorized password will be erased. Are
you sure?”
3 Select “Yes” then press ENTER. The 4-digit pass-
word is cleared. Enter a new code as shown above.
22
Level 8(Adult)
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1(Kid Safe)
Unlock Movie Rating
Password
Country Code
Prev. Select
Change
Delete
Movie Rating
Password
Country Code
New
Password
0-9 Input
Prev. Select