Go-Video VR4940 - Manual (Page 19)

CONNECTIONS & SETUP
19
Initial Setup (Continued)
Channel Add/Delete
This feature allows you to manually add or delete chan-
nels from your channel list.
11
Follow steps 1-3 as shown under Auto Channel
Set.
22
Use v / V to select the CH. Add/Del option.
33
Press B to move to the third level.
The Edit icon is highlighted.
44
Press ENTER.
The Channel Edit menu appears.
55
Use v / V or 0-9 to select a channel to add or
delete then press ENTER.
The Add or Delete icon is highlighted.
66
Press ENTER to confirm your setting.
77
Repeat steps 5-6 to add or delete additional
channels.
Clock (Auto)
The DVD Recorder+VCR gives you two ways to set the
time and date: Auto or Manual. Auto is the default setting
and enables the DVD Recorder+VCR to set the clock
whenever the DVD Recorder+VCR is off or in Standby
mode.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the General option.
33
While the General option is selected, press B to
move to the second level.
44
Use v / V to select the Clock option.
55
Press B to move to the third level.
66
Use v / V to select the Auto option then press
ENTER.
The Auto option is set at the factory. In the Auto option,
the DVD Recorder+VCR looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the
clock using the Coordinated Universal Time.
77
Use v / V to choose your Time Zone.
You can set your local Time Zone manually. When Time
Zone is set to Auto, the DVD Recorder+VCR will use XDS
information to determine the proper setting.
88
Use B to choose the Daylight Saving option.
Use v / V to choose Auto, On, or Off.
You can turn Daylight Savings On or Off manually. When
set to Auto, the DVD Recorder+VCR will use XDS infor-
mation to determine the proper setting.
99
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
ote
If your local TV station does not send date and time informa-
tion, or sends incorrect information, you can set the clock man-
ually.
Clock (Manual)
11
Follow steps 1-5 as shown under Clock (Auto).
22
Use v / V to select the Manual option then
press ENTER.
33
Enter the necessary information for date and
time.
b
/ B (left/right): Moves the cursor to the previous
or next column.
v
/ V (up/down): Changes the setting at the current
cursor position.
44
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
Time Zone
Manual
Auto
Auto
Daylight
Savings Auto
Prev. Select
Tuning Band
Auto Channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
AM
Manual
Auto
Year
Date
Time
Select
12
2003
00
1 1 /
:
Ch. 2
Delete
Add
0-9 Input Return