Fujitsu Siemens Computers Pocket LOOX N100 Series - Manual (Page 38)

Operating the Pocket PC
Displaying battery charge level
► In settings, tap on the power symbol:
The battery charge level is displayed.
Configuring Suspend mode
► In settings, tap on the power symbol:
► Select the register card for non-use.
► Using the slide control, set the number of minutes of non-use after which the Pocket PC should
switch into Suspend mode in battery operation and/or with an external power source.
At the end of the stated time, the Pocket PC will automatically be set into Suspend mode.
► Tap on to close the window and accept the settings.
Display system information
You can display the system information of your Pocket PC, such as the hardware and software
versions and the type of memory card:
►
In settings, tap on the system symbol:
The system information will be shown.
30 A26391-K197-Z120-1-7619, Edition 1