FOCUS Enhancements Bridge/Router MX-4DV - Manual (Page 130)

MX-4 DV U SER G UIDE C HAPTER 13 126
The subnet mask information should be automatically filled in the blank space. If not, fill in
the subnet mask blank space with the following: 255.255.255.0.
NOTE
If you have selected the A DVANCED button before typing in the subnet mask (or pressing the TAB
key), you will be taken to a new window asking you to input the subnet mask. The correct subnet
mask number will appear next to the IP address. Select
OK and the subnet mask blank space will be
filled.
4 On the MX-4 DV, use SHIFT + SETUP / FTP to enter the IP Address Screen. In the “IP” section,
enter the following IP address: 192.168.1.3. Click OK .
5 Reboot the MX-4 DV (power off and on).
6 After the MX-4 DV has rebooted, press SHIFT + SETUP to enter the IP Address Screen. The new
IP address (192.168.1.3) is displayed in
RED
.
7 Restart the computer. When the Name and Password screen appears, select cancel.
NOTE
Do not enter your name and password at this time.
8 Select Start (from the bottom tab bar) and then Run. When a new window appears, type cmd
or command in the Open blank and click
OK .
A new MS-DOS window appears with C:\Documents and Settings> in the command line.