HP B6191-90029 - Manual (Page 132)

Chapter 6
Special Procedures
Fibre Channel Arbitrated Loop Hub Monitor
132
PSM Configuration File
File name: /var/stm/config/tools/monitor/dm_fc_hub.psmcfg
Default settings:
• PSM Resource Name: /connectivity/status/hubs/FC_hub
• State Handling: Requires the use of set_fixed to set UP state.
• DOWN state mapping: Serious and Critical map to DOWN.
HUB_X_IS_MONITORED value 1 (Yes) This setting determines if the indicated hub will be
monitored.
Valid values are 0 (No) and 1 (Yes).
HUB_X_SYSNAME text none Identifies the hub's sysname if the hub's
system.sysName value is not set.
Table 6-1 PSM Configuration File Fields (Continued)
Setting
Default
Value Description