HP 15 - Manual (Page 74)

Speaker assembly
Description Spare part number
Speaker assembly 701690-001
IMPORTANT: Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the speaker assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 32 ).
5. Remove the keyboard (see Keyboard on page 36 ).
6. Remove the top cover (see Top cover on page 40 ).
7. Remove the hard drive (see Hard drive on page 44 ).
8. Remove the USB board (see USB board/Audio jack on page 47 ).
9. Remove the WLAN (see WLAN module on page 48 ).
10. Remove the system board (see System board on page 51 ).
Remove the speaker assembly:
NOTE: The speaker screws were removed during the process to remove the top cover.
▲ Gently release the wires (1) routed along the top of the base enclosure and lift both pieces of the
speaker assembly (2).
66 Chapter 4 Removal and replacement procedures