haier PH-4210D - Manual (Page 31)

- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of running time you will have your
new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
1 . Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and
a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
If you expect to leave your TV dormant for an extended period of time (such as a vacation), unplug
the power cord to protect against possible damage from lightning or power surges.
Owner s Manual 31
The PDP Manufacturing Process: Minute colored /bright/dark dots may present on the screen.
The Plasma Panel (the display device of this product) is composed of 0.9 to 2.2 million cells. A few cell defects may normally
occur in the PDP manufacturing process or appear over time. Minute, non-conforming pixels visible on the screen do not
indicate a defective panel, and fall within acceptable operational standards. This is indicative of PDP technology and is not a
sufficient cause for the set to be exchanged or returned. Our production technology will minimize these cell defects as best
possible during the manufacture and operation of this product.