haier PH-4210D - Manual (Page 18)

This TV set has three methods to set channels: Automatic search, manual search, and fine tune.
In this section, how to use the remote control to set channels is explained. You can also use the
buttons on the TV set to set channel.
System Menu
Color Sys. AUTO
Sound Sys. M/N
Fine Tune 49.75MHz
Skip Off
Channel Type Cable
CATV Type STD
Auto Scan
B
C
A
1
Press MENU button and then use VOL+/- button to select the SYS. Menu.
2
Press CH+/- buttons to select "Channel Type" item.
3
Press VOL+ button to select Cable or Air item.
Note : the tuning menu can only be
operated in normal TV mode.
Channel Type
B
C
A
18 Plasma TV
Automatic Scan
1
Press MENU button and then use VOL+/- button to select the SYS. Menu.
2
Press CH+/- buttons to select "Auto Scan" item.
3
Press VOL+ button to ensure automatic search function work.
4
Press MENU button to stop automatic search function.
After the search has finished, all available channels
will be automatically preset in order.
When Air is selected, the TV will detect antenna signals and will search
for antenna TV channels available in your local area.
When Cable is selected, the TV will detect cable company supplied
signals and will search for cable TV channels available in your area.
Make sure that registration with your cable TV provider and connection
of equipment are completed.
When Air and Cable are selected, the TV will detect the antenna
signals and cable company supplied signals, and search for the
antenna TV and cable TV channels available in your area.
Color Sys. AUTO
Sound Sys. M/N
Fine Tune 49.75MHz
Skip Off
Channel Type Cable
CATV Type STD
Auto Scan
CATV Type
1
Press MENU button and then use VOL+/- button to select the SYS. Menu.
2
Press CH+/- buttons to select "CATV Type" item.
3
Press VOL+ button to select STD, IRC or HRC item.
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
Note : STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.