haier PH-4210D - Manual (Page 26)

Time Setup
If Off-time or On-time is intended in AV1/S-Video/YPbPr/YCbCr/VGA , follow the instructions as below:
Clock 12:30
Off Time 20:30
On Time 17:30
On CH 000
Remind Time 19:00
Remind CH 000
B
C
A
Indication will appear on the screen 1 minute prior to
the shut down of the set
Off Time
Time Setup
Note:
If Clock is set, the time you set for Off Time and On Time will be a point
of time, Otherwise, if Clock is not set, the time you set for Off Time and
On Time will be a period of time, And it will account time when you set
automatically .
Note:
The Sleep Time and Off Time can not be set as simultaneously .
If both time are set , the later setup will be in operation.
The clock will only work if the TV set is turned on or in standby.
When the set is disconnect from the power supply or is turned off by
the main power on the rear panel, the clock loses power and will need
to be reset when the power is reconnected.
1
Press MENU button and then VOL+/- button to select the TIME menu.
2
Press CH+/- button to select "Clock",press VOL +/- button to select hour
or minute position, then press the digital buttons to set the value of hour or minute.
Clock Setting
Off/On Time
Using on/off time function, the TV set can automatically turn on to a preset channel or shut down at a preset time.
1
Press CH+/- button to select "On Time", press VOL+/-button to select hour or minute position; then press the digit
buttons to set the value of both hours or minutes.
2
Press CH+/- button to select "On CH", then press the digit buttons to select your desired channel.
3
Repeat step 1-2 to set "Off Time".
Remind Time/Remind CH
1
Press MENU and then VOL+/- button to call up the TIME menu on the screen.
2
Press CH+/- button to select "Remind Time", then press VOL+/- button to select hour or minute position;
then press the digit buttons to set the value of hour or minute.
3
Press CH+/- button to move the cursor to "Remind CH".
Then press the digit buttons to set the desired channel.
26 Plasma TV