Husqvarna ST724 - Manual (Page 16)

16
ASSEMBLY
1 - Shift Lever Knob
2 - Spare Shear Bolt Spacers
2 - 3/8 Inch Flat Washers
1 - 3/8-16 x 2 Inch Hex Hd Screw
2 - 1/4 - 20 x 1-3/4 Shear Bolts
2 - Spare 1/4-20 Locknuts 1 - 3/8 - 16 Hex Nut 1 - 3/8 Inch Lockwasher
CONTENTS OF SHIPPING
CARTON
1- Snow thrower completely assembled except for the
crank assembly, shift rod assembly and knob and
upper handle, which is in the folded down position.
1- Crank Assembly
1 - Spring for Remote Chute Return
1- Owner's Manual (Not Shown)
1- Parts Box Containing:
1 - Container of 5W30 Oil
1 - Electric Starter Cord 9.5 Ft. (if equipped with
electric start)
1 - Chute Assembly (may be assembled)
1 - Bag of Assembly parts containing:
TOOLS REQUIRED FOR
ASSEMBLY
1 - Knife (to cut carton and plastic ties)
2 - 1/2 inch Wrenches (or adjustable wrenches)
2 - 9/16 inch Wrenches (or adjustable wrenches)
2 - 3/4 inch Wrenches (or adjustable wrenches)
1 - Pair Pliers or Screw Driver (to spread cotter pin)
1 - Spring (Remote Chute Return)